NW,N,NE
W, E
SW, S, SE
|
While pressing one of these buttons the driver will move the mount in that direction at the Move Rate selected.
When the button is released the move will stop.
Note: the directions (N=North, S=South, etc.) do not necessarily reflect actual compass directions. In some cases North may be swapped with South and East with West.
|
STOP
|
Pressing this button will send a command to the mount to immediately stop movement. This includes stopping a slew or park operation.
|
Swap E/W
|
Swaps the direction that the mount will move for East/West moves.
Note: if you perform this operation and you are using an autoguider you may need to recalibrate.
|
The checkbox to the left of Swap E/W
|
Flips the positions of the NE/E/SE and NW/W/SW buttons.
|
Swap N/S
|
Swaps the direction that the mount will move for North/South moves.
Note: if you perform this operation and you are using an autoguider you may need to recalibrate.
|
The checkbox to the left of Swap N/S
|
Flips the positions of the NW/N/NE and SW/S/SE buttons.
|
Rotate 90
|
Rotates the position of the direction buttons by 90 degrees.
|
